Begadi PD9 Sport Classic / FN Herstal P90 with Begadi HPA / CO2 System and PRO HopUp (18+)

High-quality and flexible HPA hose with 100cm length (nylon sleeved).

Plugs: US Foster QD connectors, made of stainless steel
Inner diameter: 6mm
Pressure range: Max 15 Bar / 220 PSI

Suitable for all HPA guns and regulators with US Foster connectors - up to 15 BAR / 220 PSI.

Thanks to the flexible hose material, this HPA hose can be laid even better on vests etc.. The hose is therefore less stubborn and its flexibility makes it easier to carry the weapon.

Not suitable for Tippmann HPA weapons.

High-quality and flexible HPA hose with 100cm length (nylon sleeved).

Plugs: US Foster QD connectors, made of stainless steel
Inner diameter: 6mm
Pressure range: Max 15 Bar / 220 PSI

Suitable for all HPA guns and regulators with US Foster connectors - up to 15 BAR / 220 PSI.

Thanks to the flexible hose material, this HPA hose can be laid even better on vests etc.. The hose is therefore less stubborn and its flexibility makes it easier to carry the weapon.

Not suitable for Tippmann HPA weapons.

High-quality and flexible HPA hose with 100cm length (nylon sleeved).

Plugs: US Foster QD connectors, made of stainless steel
Inner diameter: 6mm
Pressure range: Max 15 Bar / 220 PSI

Suitable for all HPA guns and regulators with US Foster connectors - up to 15 BAR / 220 PSI.

Thanks to the flexible hose material, this HPA hose can be laid even better on vests etc.. The hose is therefore less stubborn and its flexibility makes it easier to carry the weapon.

Not suitable for Tippmann HPA weapons.

All information in text form as well as videos about the Taifun Regulator can be found here.


Below is some additional information about the regulator (extract):

Our regulators can be operated not only with HPA cylinders, but optionally also with commercially available 425 g / 600 ml CO2 cylinders. These are known from sparkling water devices such as "SodaSteam, SodaNature, Soda Maxx etc." and can be purchased and exchanged e.g. at your local retailer and online. An HPA bottle or compressor is therefore not necessarily required.

In both cases, whether HPA or CO2, the regulator delivers a high flow rate for fast shot sequences. Please note that most electro-pneumatic systems on the market are not suitable for CO2 compared to our Begadi HPA system. Therefore, before using CO2, check whether your HPA system is also compatible for it if you are not using the Begadi HPA system.

The Taifun Regulator is characterized by a simple and slim design. The colors are grey and green, which means that the Taifun does not draw unnecessary attention to itself. There is a pressure gauge on the regulator itself, which shows the set pressure in bar. Compared to our HURRICANE, the TAIFUN is somewhat more compact and comes with two adapters (HPA/CO2).

Features:
- High flow rate
- HPA and 425g / 600ml CO2 ready
- Infinitely adjustable from 0 - 14 bar
- Tournament lock
- US Foster QD coupling
- Pressure relief valve


Technical data:
- Adjustment range 0 - 14 bar (0 - 200 PSI)
- Materials: Aluminum and stainless steel
- Pre-assembled US QD female coupling + US QD male coupling for 6 mm hoses
- Integrated tournement lock, which can be closed with a cable tie
- Fast air flow & constant pressure. Refreshing up to 30 shots / second possible
- Adjustable with a standard 8 mm hexagon wrench (included)
- Can be loaded up to a maximum of 100 bar
- Pressure relief valve
- HPA cylinder adapter (1/8 NPT)
- CO2 adapter for commercially available 425 g / 600 ml CO2 cylinders with separate pressure gauge for cylinder fill level (display in bar)
- Weight without adapter: 196 g
- Weight with HPA adapter and locking ring: 243 g
- Weight with CO2 adapter and locking ring: 288 g
- Total height without adapter: 71.7 mm
- Total height with HPA adapter: 93.2 mm
- Total height with CO2 adapter: 105.2 mm
- Diameter: 32.0 mm
- Total width from pressure relief valve to US QD connection: 86.0 mm

• We add a Bollé goggle with "B" certification - in clear. Normally the Cobra series or similar.
  




(* oder qualitativ gleich-/höherwertigere Tuningteile je nach Verfügbarkeit) (die Lieferzeit kann sich um 1-2 Werktage verzögern)

All information in text form as well as videos about the Hurricane Regulator can be found here.


Below is some additional information about the regulator (extract):

Our regulators can be operated not only with HPA cylinders, but optionally also with commercially available 425 g / 600 ml CO2 cylinders. These are known from sparkling water devices such as "SodaSteam, SodaNature, Soda Maxx etc." and can be purchased and exchanged e.g. at your local retailer and online. An HPA bottle or compressor is therefore not necessarily required.

In both cases, whether HPA or CO2, the regulator delivers a high flow rate for fast shot sequences. Please note that most electro-pneumatic systems on the market are not suitable for CO2 compared to our Begadi HPA system. Therefore, before using CO2, check whether your HPA system is also compatible for it if you are not using the Begadi HPA system.

The Hurricane Regulator is characterized by an elegant and slightly angular design. The colors are kept simple so that the Hurricane does not attract unnecessary attention. There is a pressure gauge on the regulator itself, which shows the set pressure in bar. This pressure gauge has a fluorescent background color, which is easy to read even in poor lighting conditions.

Features:
- High flow rate
- HPA and 425g / 600ml CO2 ready
- Fluorescent pressure gauge
- Infinitely adjustable from 0 - 14 bar
- Tournament lock
- US Foster QD coupling
- Pressure relief valve


Technical data:
- Adjustment range 0 - 14 bar (0 - 200 PSI)
- Materials: Aluminum and stainless steel
- Pre-assembled US Foster QD coupling
- Integrated Tournament-Lock, which can be closed with a cable tie
- Fast air flow & constant pressure. Refreshing up to 30 shots / second possible
- Pressure gauge with fluorescent background color
- Adjustable with a standard 4 mm hexagon wrench (included)
- Can be loaded up to a maximum of 100 bar
- Pressure relief valve
- CO2 adapter for standard 425 g / 600 ml CO2 cylinders with separate pressure gauge for cylinder fill level (display in PSI)
- Weight without adapter: 274 g
- Weight with CO2 adapter and locking ring: 370 g
- Total height without CO2 adapter: 86.4 mm
- Total height with CO2 adapter: 120.8 mm
- Diameter: 40.00 mm
- Total width from the pressure relief valve to the US QD connection: 93.5 mm

• 1kg Bio BBs in suitable weight is supplied. White color. Normally we choose Lonex, PHX Prime or S&T.
  

• We supply a sling that fits to the ordered airsoft gun - in suitable color.
  



(* or parts in same or higher quality depending on availability) (delivery time may be delayed by 1-2 working days)

Supply of: ProTech Silicone Oil / Spray 400ml (SKU 19018005)

• We add a print of a chrono test with 10-20 shots @ 0,20g BBs.
  



(* or parts in same or higher quality depending on availability) (delivery time may be delayed by 1-2 working days)