Tappet Plate for Begadi HPA System -V3 Version, 71mm-
Reinforced Tappet Plate, suitable for the Begadi HPA System.
Made from very robust technopolymer with fiber content.
This achieves a very high tensile strength, but still has sufficient flexibility to prevent breakage. The bulges on the side guides reduce friction with the Gearbox.
Installation instructions:
When selecting the correct Tappet Plates, you should use the original that was/is fitted on delivery as a guide. Whether the Tappet Plate is fitted with an O-ring or without an O-ring, and which version was fitted. There may be model-specific differences here and, for example, a V2 Tappet Plate may be installed on individual V3 models. (Gearbox from manufacturer X is e.g. 1mm longer than from manufacturer Y). If you are unsure about this, our support team will be happy to help and advise you.
Properties:
Material: Technopolymer with fiber content
Gearbox: V3 (only suitable for the Begadi HPA system)
Length: 71 mm
Width: 13.3 mm
Front width: 8.1 mm
The item shown above is a tested accessory for our HPA system. Barrels have been used for a long time during development and tested for function
Further interesting articles and information about our HPA system
- Begadi HPA/CO2 System info page (All information and videos about the system)
- Begadi HPA seals for system maintenance (complete)
- Tappet Plates for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA System (screws, Springs, pins, connector)
Made from very robust technopolymer with fiber content.
This achieves a very high tensile strength, but still has sufficient flexibility to prevent breakage. The bulges on the side guides reduce friction with the Gearbox.
Installation instructions:
When selecting the correct Tappet Plates, you should use the original that was/is fitted on delivery as a guide. Whether the Tappet Plate is fitted with an O-ring or without an O-ring, and which version was fitted. There may be model-specific differences here and, for example, a V2 Tappet Plate may be installed on individual V3 models. (Gearbox from manufacturer X is e.g. 1mm longer than from manufacturer Y). If you are unsure about this, our support team will be happy to help and advise you.
Properties:
Material: Technopolymer with fiber content
Gearbox: V3 (only suitable for the Begadi HPA system)
Length: 71 mm
Width: 13.3 mm
Front width: 8.1 mm
|
★ HPA Engine, developed by Begadi in Germany ★ Fully CNC machined (stainless steel, aluminum 7075...) ★ Attractively priced and all guns with PTB approval ★ Easy handling (plug & play) ★ Wide energy spectrum (6-12 bar = 0.6 - 3 joules) ★ Fully mechanical and therefore weatherproof ★ Constant closed-bolt system (without precocking) ★ Compatible with AEG Cylinderheads & Nozzles ★ CNC machined Triggers Unit for many weapons ★ Fast & precise trigger mechanism ★ Very efficient even with high pressures ★ Designed for HPA and 425g CO2 Bottles ★ Also available in exotic weapons |
The item shown above is a tested accessory for our HPA system. Barrels have been used for a long time during development and tested for function
Further interesting articles and information about our HPA system
- Begadi HPA/CO2 System info page (All information and videos about the system)
- Begadi HPA seals for system maintenance (complete)
- Tappet Plates for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA System (screws, Springs, pins, connector)
Review Partner