Begadi Universal GBB Intake Valve with M5 thread (for KJW, TM, WE, AW, VFC, SRC, Nuprol etc.)
-
ORGA Super Power 6.00mm Barrel, for TM / WE GBBs - 114.4mm (free from 18 y.)Special Price €29.90 Regular Price €39.90
![EPeS O-ring set for WE M9 magazines, pack of 5 [E045-PZM9-WE]](https://www.begadi.com/media/catalog/product/cache/c5d0e56eb553c22c59750f4b00ae9e52/b/-/b-epes-pzm9-we-spare-seal-kit-gbb-mag-flange-we-m9-g.jpg)
Other interesting articles:
This universal intake valve for GBB magazines with M5 thread is suitable for many gas blow-back (GBB) magazines equipped with the M5 thread, e.g. from KJW, WE, AW, SRC, Nuprol and others. It is compatible with various magazine models, such as Hi-Capa, 1911, P226, M9 or G-series
Compared to standard valves, this model has a slightly stronger Spring. This allows it to better withstand higher pressures, for example from powerful gas or high temperatures. The stronger Spring also protects the valve from damage caused by overpressure during filling. The gas cylinder must therefore be pressed more firmly onto the valve when filling. The valve is made of brass, a material that has proven to be reliable in the event of temperature fluctuations
Installation instructions:
To replace, simply remove the old valve with a suitable valve wrench and insert the new one. Please apply some silicone oil to the O-rings during installation (see instruction video) and only tighten the valve hand-tight
Accessories:
- Begadi Universal Valve Key / Slim Line Valve Wrench
Information video on installation, fit and maintenance:
Product views:
Shown in installed condition:
Compared to standard valves, this model has a slightly stronger Spring. This allows it to better withstand higher pressures, for example from powerful gas or high temperatures. The stronger Spring also protects the valve from damage caused by overpressure during filling. The gas cylinder must therefore be pressed more firmly onto the valve when filling. The valve is made of brass, a material that has proven to be reliable in the event of temperature fluctuations
Compatibility informationOur intake valve for GBB magazines with M5 thread is suitable for a wide range of GBB magazines, including the models we tested: » Tokyo Marui / TM GBBs * » Poseidon B&W BW92 GBBs » SRC GBBs » WE 1911, Bulldog, F226, F229, G17, GForce19 GBBs » WE Hi-Capa, Little Bird, M9, XDM GBBs » KJW 1911, KP-07, KP-06, KP-05, M9, KP-13 GBBs » KJW P226, P229 GBBs * Marui: Depending on the weapon/version, the head diameter must be checked! The intake valve for GBB magazines is also suitable for » all magazines that are compatible with the above-mentioned magazines » the Begadi Frag Grenade Set, gas-operated, modular » the StratAIM gas grenades sold by us » all magazines whose inlet valves match the dimensions of the illustration linked on the right (the illustration can be enlarged by [clicking]!) The intake valve for GBB magazines is not suitable for » Army Armament pistols (different thread) » Not suitable for CO₂ systems |
Installation instructions:
To replace, simply remove the old valve with a suitable valve wrench and insert the new one. Please apply some silicone oil to the O-rings during installation (see instruction video) and only tighten the valve hand-tight
Accessories:
- Begadi Universal Valve Key / Slim Line Valve Wrench
Information video on installation, fit and maintenance:
Product views:
Shown in installed condition:
