Begadi PRO VARIOHEAD Adjustment Tool -573mm-
This adjustment tool is required to adjust the Begadi PRO VARIOHEAD directly via the inner barrel.
Disassembly of the body is therefore not necessary to adjust the energy.
The hexagon is made of robust stainless steel and is only suitable for the VARIOHEAD.
Due to the different cylinder heads, this hexagon has a special dimension of 3.80mm.
The red protective plastic cover protects the inner barrel from scratching. Likewise, this has a diameter of 5.90mm, whereby the tool is guided centrally and thus the hexagon inside is easily hit without causing damage to the cylinder head.
To make it easier for you to adjust, a marking with the direction of rotation and the positions has been placed on the handle. In combination with the click system, it is thus very easy and quick to find the desired setting.
The indicated length corresponds to the front edge to the grip (the grip is NOT measured here).
To find the right length for your gun, take the barrel length + 60mm + flashhider (if you don't want to remove it), or measure from flashhider to approx. pistonhead in the gearbox. Thus, for example, an M16 with a 509mm inner barrel will require the 573mm tool. Choose a longer tool to compensate for pre-cocking of the pistons
Detailed introduction video:
Disassembly of the body is therefore not necessary to adjust the energy.
The hexagon is made of robust stainless steel and is only suitable for the VARIOHEAD.
Due to the different cylinder heads, this hexagon has a special dimension of 3.80mm.
The red protective plastic cover protects the inner barrel from scratching. Likewise, this has a diameter of 5.90mm, whereby the tool is guided centrally and thus the hexagon inside is easily hit without causing damage to the cylinder head.
To make it easier for you to adjust, a marking with the direction of rotation and the positions has been placed on the handle. In combination with the click system, it is thus very easy and quick to find the desired setting.
The indicated length corresponds to the front edge to the grip (the grip is NOT measured here).
To find the right length for your gun, take the barrel length + 60mm + flashhider (if you don't want to remove it), or measure from flashhider to approx. pistonhead in the gearbox. Thus, for example, an M16 with a 509mm inner barrel will require the 573mm tool. Choose a longer tool to compensate for pre-cocking of the pistons
Detailed introduction video: