Magazine for WE G - Force 17 / 19 / 34 series, 25 BBs -CO2 version- with Begadi Stainless Efficiency valve + replacement WE outlet valve
![Magazine for Army Armament M1911 / R28, R29, R30 & R32 series, with extended base - with Begadi Stainless Efficiency Valve (31 BBs) [A131]](https://www.begadi.com/media/catalog/product/cache/c5d0e56eb553c22c59750f4b00ae9e52/b/-/b-22121253-army-gbb-magazin-m1911-extended-bottom-mit-begadi-efficiency-ventil-orange-g.jpg)
Type: CO2 magazine for 6mm BBs
Material: Mainly metal
Capacity: 25 BBs
Scope of delivery:
Magazine with already installed Begadi Stainless Efficiency valve + replacement outlet valve (original WE)
Suitable for:
- WE G Force 17 / 19 / 34 (with the G19 it is a little over)
ATTENTION: Please note thatthese magazines are only suitable for temperatures below 15°C.
Our Begadi Efficiency valve made of stainless steel is already installed in this magazine.
Thanks to its smooth operation and revised design, this valve ensures a significantly more constant energy output and reduces gas consumption by up to 15%.
For example, it is possible to fire up to 55 rounds at 0.85 joules from a small 1911 GBB magazine (data with ProTech gas at 18°C). This valve also has an additional O-ring on the inside so that the firing piston is sealed to the rear when opened and no gas can escape.
The amount of gas that can escape per shot has been set so that the GBB can work without problems but does not go into cool-down so quickly. As O-rings can always leak, we use a special material here that is resistant to cold. This does not contract in the cold and lasts much longer. All components of our valves are CNC-machined from stainless steel. Due to the high pressure of CO2, we work with a PTFE/Teflon seal which is also CNC machined.
The Begadi Efficiency valves are not available individually, but only when installed in magazines or GBBs as/where we offer them in the store. Customers who have purchased magazines or GBBs without Begadi Stainless Efficiency Valves from Begadi in the past can have the Begadi Stainless Efficiency Valves retrofitted by our workshop on request. This service is limited to magazines & GBBs purchased from Begadi.
Sectional drawings of the Begadi Stainless Efficiency valves incl. material information:
Note on the additionally supplied original WE exhaust valve:
WE only supplies its GBBs and magazines including their original exhaust valves. Therefore, for the Begadi versions of the magazines, the original WE valves are then removed and replaced with the Begadi Stainless Efficiency valves. The original WE exhaust valve is then removed and supplied with the magazine (included in the packaging). We recommend keeping the original WE valve as a backup. The outer O-rings can also be used for the Begadi Stainless Efficiency valve
Accessories:
- Begadi Universal Valve Key / Slim Line Valve Wrench
Material: Mainly metal
Capacity: 25 BBs
Scope of delivery:
Magazine with already installed Begadi Stainless Efficiency valve + replacement outlet valve (original WE)
Suitable for:
- WE G Force 17 / 19 / 34 (with the G19 it is a little over)
ATTENTION: Please note thatthese magazines are only suitable for temperatures below 15°C.
Our Begadi Efficiency valve made of stainless steel is already installed in this magazine.
Thanks to its smooth operation and revised design, this valve ensures a significantly more constant energy output and reduces gas consumption by up to 15%.
For example, it is possible to fire up to 55 rounds at 0.85 joules from a small 1911 GBB magazine (data with ProTech gas at 18°C). This valve also has an additional O-ring on the inside so that the firing piston is sealed to the rear when opened and no gas can escape.
The amount of gas that can escape per shot has been set so that the GBB can work without problems but does not go into cool-down so quickly. As O-rings can always leak, we use a special material here that is resistant to cold. This does not contract in the cold and lasts much longer. All components of our valves are CNC-machined from stainless steel. Due to the high pressure of CO2, we work with a PTFE/Teflon seal which is also CNC machined.
The Begadi Efficiency valves are not available individually, but only when installed in magazines or GBBs as/where we offer them in the store. Customers who have purchased magazines or GBBs without Begadi Stainless Efficiency Valves from Begadi in the past can have the Begadi Stainless Efficiency Valves retrofitted by our workshop on request. This service is limited to magazines & GBBs purchased from Begadi.
Sectional drawings of the Begadi Stainless Efficiency valves incl. material information:
Note on the additionally supplied original WE exhaust valve:
WE only supplies its GBBs and magazines including their original exhaust valves. Therefore, for the Begadi versions of the magazines, the original WE valves are then removed and replaced with the Begadi Stainless Efficiency valves. The original WE exhaust valve is then removed and supplied with the magazine (included in the packaging). We recommend keeping the original WE valve as a backup. The outer O-rings can also be used for the Begadi Stainless Efficiency valve
Accessories:
- Begadi Universal Valve Key / Slim Line Valve Wrench
