Magazine for KJW KP-05 GBB -CO2 version-
-
![HFC HighCap Drum Magazine for TM / WE / KJW M9 GBB Models [HD-002]](https://www.begadi.com/media/catalog/product/cache/a491986f8011072f66fb1fed37f51dcc/b/-/b-hfc-hd-002-drummag-m9-g.jpg)
HFC HighCap Drum Magazine for TM / WE / KJW M9 GBB Models [HD-002]Special Price €84.90 Regular Price €99.90
![Magazine for Army Armament R17 GBB series, flat bottom - with Begadi Stainless Efficiency valve [A46]](https://www.begadi.com/media/catalog/product/cache/a491986f8011072f66fb1fed37f51dcc/b/-/b-22121252-army-gbb-magazin-r17-kurz-flacher-boden-mit-begadi-efficiency-ventil-purple-g.jpg)
Other interesting articles:
-
CO2 magazine for the KJW KP-05 GBB.
Capacity: 29 rounds
Material: Metal
Suitable for:
- KJW KP-05
- KJW KP-06
- Marui HiCapa
- KJW KP-11
Attention:
Especially with the KP-05 CO2 version, KJW has meant it a little too well with the gas efficiency. Due to the low amount of CO2, it can happen that this model does not repeat completely.
As a solution, the amount of CO2 per shot can be increased via the exhaust valve. This can be done either by yourself or through our workshop.
(For more information, please refer to the last product image)
1: Unscrew the valve from the magazine with a valve wrench
2: Hold the front section (1) lightly with pliers and loosen the inner rod (3) with a slotted screwdriver
3: Shorten the inner spring (2) by two turns so that the valve can open a little further
4: Screw the valve back together as far as it will go and then unscrew it ½ turn (use threadlocker if necessary)
Tip / useful accessories:
-BEGADI GBB loading aid for pistols
Capacity: 29 rounds
Material: Metal
Suitable for:
- KJW KP-05
- KJW KP-06
- Marui HiCapa
- KJW KP-11
Attention:
Especially with the KP-05 CO2 version, KJW has meant it a little too well with the gas efficiency. Due to the low amount of CO2, it can happen that this model does not repeat completely.
As a solution, the amount of CO2 per shot can be increased via the exhaust valve. This can be done either by yourself or through our workshop.
(For more information, please refer to the last product image)
1: Unscrew the valve from the magazine with a valve wrench
2: Hold the front section (1) lightly with pliers and loosen the inner rod (3) with a slotted screwdriver
3: Shorten the inner spring (2) by two turns so that the valve can open a little further
4: Screw the valve back together as far as it will go and then unscrew it ½ turn (use threadlocker if necessary)
Tip / useful accessories:
-BEGADI GBB loading aid for pistols
Review Partner