DYE LT Alu Air System / HPA Bottles with pre-regulator 0,8L (48ci) - 200 bar / 3000 PSI
Other interesting articles:
The DYE HPA bottle 0.8L is made of aluminum with a stainless steel core, which makes it lighter than normal steel bottles.
There is a 1/8 MTP thread at the top of the bottle regulator onto which the "gun regulator" (such as Begadi Hurricane/Taifun) can then be screwed on to.
Procedure for the correct assembly sequence:
First screw on the gun regulator (such as Begadi Hurricane/Taifun), then connect the hose, then connect the hose to the gun and set the pressure.
Please note / safety instructions:
Never set the pressure above the maximum specifications of the gun (i.e. the maximum pressure of the HPA system installed in the gun), as this can lead to irreversible defects in the system. The bottle is equipped with two pressure relief valves (bursting discs 1.8K and 5K) which burst if overfilled.
Technical data:
Bottle length : 295mm
Bottle diameter : 90mm
Bottle weight : 1345g
Max. filling pressure : 200 bar / 3000 PSI. Filling pressure : 200 bar / 3000 PSI
The item shown above is a tested accessory for our HPA system. Barrels have been used for a long time during development and tested for function
Further interesting articles and information about our HPA system
- Begadi HPA/CO2 System info page (All information and videos about the system)
- Begadi "TAIFUN" HPA/CO2 Regulators
- Begadi "HURRICANE" HPA/CO2 Regulators for Begadi HPA System
- Begadi HPA "Flex" hose, 100cm -black
- Begadi HPA "Flex" hose, 100cm - od-green
- Begadi HPA "Flex" hose, 100cm -TAN / FDE-
- Begadi Adjustable Pouch for HPA, 425g CO2 and gas cylinders -olive
- Begadi Adjustable Pouch for HPA, 425g CO2 and gas cylinders -flecktarn
There is a 1/8 MTP thread at the top of the bottle regulator onto which the "gun regulator" (such as Begadi Hurricane/Taifun) can then be screwed on to.
Procedure for the correct assembly sequence:
First screw on the gun regulator (such as Begadi Hurricane/Taifun), then connect the hose, then connect the hose to the gun and set the pressure.
Please note / safety instructions:
Never set the pressure above the maximum specifications of the gun (i.e. the maximum pressure of the HPA system installed in the gun), as this can lead to irreversible defects in the system. The bottle is equipped with two pressure relief valves (bursting discs 1.8K and 5K) which burst if overfilled.
Technical data:
Bottle length : 295mm
Bottle diameter : 90mm
Bottle weight : 1345g
Max. filling pressure : 200 bar / 3000 PSI. Filling pressure : 200 bar / 3000 PSI
|
★ HPA Engine, developed by Begadi in Germany ★ Fully CNC machined (stainless steel, aluminum 7075...) ★ Attractively priced and all guns with PTB approval ★ Easy handling (plug & play) ★ Wide energy spectrum (6-12 bar = 0.6 - 3 joules) ★ Fully mechanical and therefore weatherproof ★ Constant closed-bolt system (without pretensioning) ★ Compatible with AEG Cylinderheads & Nozzles ★ CNC machined Triggers Unit for many weapons ★ Fast & precise trigger mechanism ★ Very efficient even with high pressures ★ Designed for HPA and 425g CO2 Bottles ★ Also available in exotic weapons |
The item shown above is a tested accessory for our HPA system. Barrels have been used for a long time during development and tested for function
Further interesting articles and information about our HPA system
- Begadi HPA/CO2 System info page (All information and videos about the system)
- Begadi "TAIFUN" HPA/CO2 Regulators
- Begadi "HURRICANE" HPA/CO2 Regulators for Begadi HPA System
- Begadi HPA "Flex" hose, 100cm -black
- Begadi HPA "Flex" hose, 100cm - od-green
- Begadi HPA "Flex" hose, 100cm -TAN / FDE-
- Begadi Adjustable Pouch for HPA, 425g CO2 and gas cylinders -olive
- Begadi Adjustable Pouch for HPA, 425g CO2 and gas cylinders -flecktarn
Review Partner