Begadi Silverline SR25 - CNC Gearset (Low Noise) - nickel plated - 13:1 with 19Z Sector Gear
-
TFC 32:1 Ultra Torque Up GearsetSpecial Price €12.90 Regular Price €17.90 -
Lonex Delay Clips (6 pcs)€14.90
In cooperation with Red Dragon we offer our customers here a high quality, CNC manufactured gear set. A perfect concentricity and low noise level, even at high speed, distinguish this set. Made of carbon steel, the gears are suitable for all common tunings.
The surface is not as usual black oxidized, but galvanically nickel-plated.
This coating is much harder, more durable and also protects against corrosion.
No delayer (gear clip) necessary! The Sector Gear features a 5mm anchor for the tappet plate. This ensures proper timing and can prevent feeding problems.
Due to the 8 positions on the Bevel Gear for the anti-reversal, gear jams are significantly reduced for weapons without EFCS.
The Bevel Gear is compatible with commercially available Pinion Gears (e.g. Begadi Mamba, Tienly, SHS, Cyma, Lonex, Red Dragon, E&C, E&L)
Important:
This gear set is only suitable for V2.5 gearboxes like Begadi Sport MOD 25, BR10, E&C EC25, A&K K25. Due to the ratio of 13:1 and 19 teeth on the Sector Gear, an EFCS/ETU with active brake is required! Otherwise, problems with the timing may occur.
Features:
Manufacture: CNC
Material: carbon steel
Coating: electroplated nickel
Gear ratio: 13:1
Sector Gear: 19 teeth
Please note that the maximum possible spring strength depends on the installed motor, battery and gear ratio
Recommendation / guideline: Maximum spring strength to gear ratio:
26:1 to M160 spring suitable
18:1 to M150 spring suitable
16:1 to M150 spring suitable
13:1 to M130 spring suitable
Optical EFCS:
We tested the Gear Set with a Gate Titanium and could not find any problems with cycle monitoring.
Attention:
We strongly advise against combining the 13:1 Gear Set with a high speed motor (more than 30K revolutions)
Optional Accessories:
- Begadi CNC POM Sector Gear Clip / Delayer for Silverline & Cyma Gear Sets
The surface is not as usual black oxidized, but galvanically nickel-plated.
This coating is much harder, more durable and also protects against corrosion.
No delayer (gear clip) necessary! The Sector Gear features a 5mm anchor for the tappet plate. This ensures proper timing and can prevent feeding problems.
Due to the 8 positions on the Bevel Gear for the anti-reversal, gear jams are significantly reduced for weapons without EFCS.
The Bevel Gear is compatible with commercially available Pinion Gears (e.g. Begadi Mamba, Tienly, SHS, Cyma, Lonex, Red Dragon, E&C, E&L)
Important:
This gear set is only suitable for V2.5 gearboxes like Begadi Sport MOD 25, BR10, E&C EC25, A&K K25. Due to the ratio of 13:1 and 19 teeth on the Sector Gear, an EFCS/ETU with active brake is required! Otherwise, problems with the timing may occur.
Features:
Manufacture: CNC
Material: carbon steel
Coating: electroplated nickel
Gear ratio: 13:1
Sector Gear: 19 teeth
Please note that the maximum possible spring strength depends on the installed motor, battery and gear ratio
Recommendation / guideline: Maximum spring strength to gear ratio:
26:1 to M160 spring suitable
18:1 to M150 spring suitable
16:1 to M150 spring suitable
13:1 to M130 spring suitable
Optical EFCS:
We tested the Gear Set with a Gate Titanium and could not find any problems with cycle monitoring.
Attention:
We strongly advise against combining the 13:1 Gear Set with a high speed motor (more than 30K revolutions)
Optional Accessories:
- Begadi CNC POM Sector Gear Clip / Delayer for Silverline & Cyma Gear Sets
Review Partner