Begadi "Multi Angle" Vertical Front Grip for M-LOK & Keymod, black - Nylon Fiber Version -
![Begadi Rail Cover Set, Color Mix, 12 pieces, for M-LOK [TAN / gray / olive / black]](https://www.begadi.com/media/catalog/product/cache/73028b6d15677e08660b63a5dcf15c2e/b/-/b-begadi-mlok-rail-cover-set-color-mix-12stk-g.jpg)
Robust "Multi Angle" Vertical ForeGrip (Front Grip) for M-LOK and Keymod
As the name suggests, this grip can be mounted at different angles on an M-LOK or Keymod handguard. For this purpose, the upper part of the grip (receptacle) can be rotated by 180°. Installation at -15°, 90°, or +15° is thus possible. The material is robust nylon fiber weighing only 21 g. Due to its length of 62 mm, it can also be used as a hand stop. Mounting screws for M-LOK and Keymod made of steel are included in the delivery.Dimensions:
» Height: 62mm
» Width: 44mm
» Depth: 24mm
Installation:
1: Remove the upper receptacle (can be pulled off).
2: Insert the adapter into the receptacle (depending on system: M-LOK, Keymod - rotate).
3: Install the countersunk screws from below into the adapter.
4: The receptacle can now be attached to the handguard but not yet tightened.
5: Now insert the steel ball into the middle hole.
6: Now slide the grip onto the adapter at the desired angle.
7: If the grip is to point in the other direction, rotate the adapter on the handguard by 180°.
8: Once the grip is slid on, the screws can be tightened from the inside.
Tip: If you want to rotate the grip, it is sufficient to slightly loosen the screws. It can then be mounted by 180°.
Product Views:
Application Examples:
