JG Mounting washer / Washer / Clamp for M4 / M16 (S)Semi AEG Stock Tubes
-
SRU SR-Q AR ICS Advanced Kit -TAN-Special Price €89.90 Regular Price €139.00
![ICS Sirius PDW9 & CROW Nylon Fiber Stock Tube [MA-468]](https://www.begadi.com/media/catalog/product/cache/c5d0e56eb553c22c59750f4b00ae9e52/b/-/b-08623240-ics-pdw-stock-tube-combination-ma-468-g.jpg)
Other interesting articles:
This mounting washer is required for older M4/M16 (Semi AEG) models in which the Stock Tube must be screwed to the Springguide; these models usually do not have a QSX (spring change system).
The washer has a cut-out for cable routing.
Diameter: 24.40mm
Total height: 8.20mm
Height of the disk: 2.50mm
Screw required for mounting: M5
The length of the required screw varies depending on the manufacturer!
You can find long M5 screws in our screw set, for example:
Body-Pin / Receiver-Pin also included - why ?
JG has unintentionally included an M4 Body Pin (see last picture) in the packaging. We have checked this, but could not find a gun from our range where it can be used. Diameter: 5.95mm / total length: 29.45mm.
The pin is neither secured with a split pin nor with a screw in the Receiver.
Application example:
Scope of delivery - Receiver pin shown:
The washer has a cut-out for cable routing.
Diameter: 24.40mm
Total height: 8.20mm
Height of the disk: 2.50mm
Screw required for mounting: M5
The length of the required screw varies depending on the manufacturer!
You can find long M5 screws in our screw set, for example:
Body-Pin / Receiver-Pin also included - why ?
JG has unintentionally included an M4 Body Pin (see last picture) in the packaging. We have checked this, but could not find a gun from our range where it can be used. Diameter: 5.95mm / total length: 29.45mm.
The pin is neither secured with a split pin nor with a screw in the Receiver.
Application example:
Scope of delivery - Receiver pin shown:
