Begadi "XSTROBE" Tracer with optional flame effect (14mm CCW) -TAN-
-
ROEDALE Modular "7.62" Series Silencer, "X-Large", adjustable lengthSpecial Price €34.90 Regular Price €43.90
Other interesting articles:
The XSTROBE is an electrically operated Tracer module with optional muzzle flash simulation (flame effect), a body made of robust aluminum - and is equipped with a 14mm CCW thread.
The Tracer module can be used with many common airsoft guns.
Unlike the SPITFIRE series, the Body has side openings through which the light can be seen - including blue UV light.
The two functions, UV Tracer and muzzle flash effect, can be switched via the power button on the electronics. You can choose between the operating modes "Tracer only", "Flame effect only" or a combination of "Tracer with flame effect".
In contrast to RGB-Variants, the color of the flame effect is fixed. It appears in a fire-like color (orange with blue components).
The electronics are housed in a robust body and have a USB charging socket. A suitable charging cable is included in the scope of delivery
Tracer data:
» Length: 101mm
» Diameter: 38.10mm
» Weight: 174g (with Tracer unit)
» Material: aluminum
» Thread: 14mm CCW
Tracer unit:
» Length: 49mm
» Diameter: 31.50mm
» Weight: 26g
» Max. ROF: 35 BBs / second
» Runtime: approx. 15000 rounds without Spitfire function, approx. 6000 rounds incl. Spitfire function
Functions: (adjustable)
❖ UV Tracer (for green BBs)
❖ Flame effect (muzzle)
Adjusting the unit:
❖ Remove the unit from the Body (unscrew)
❖ Briefly press the power button once to switch on the unit
❖ Press and hold the power button for 2 seconds to change the function
❖ Briefly press the power button when the unit is switched on to switch it off
Charging & battery monitoring:
❖ Remove the Tracer Unit from the Body (unscrew)
❖ Connect the USB charging cable to the Tracer unit.
❖ A red LED inside will now start to flash slowly
❖ When the battery is fully charged, the LED briefly changes to "green" and a beep sounds
❖ If it is not used for a long time, it should be charged every 2-3 months
❖ If the battery drops below 30%, a red warning light starts to flash every 2 seconds
❖ If the Tracer is not moved for 5 minutes, it switches to "stand-by" and can be reactivated by shaking/moving it
Information on use without Tracer BBs:
If you use the XSTROBE without Tracer BBs, the muzzle flash simulation is still fully usable. In this case, we recommend using the module in mode 2 (Tracer deactivated). This increases the battery life.
Replacement Battery:
» Batterie de remplacement pour les unités Begadi Tracer (MK2, MK3, MK4, PBS1, XSTROBE)
Included / scope of delivery:
✔ XSTROBE Tracer Unit with 14mm CCW thread
uSB charging cable
✔ Instructions for use (English)
Begadi XSTROBE video
Product views (outside, complete):
Application examples (without Tracer module, empty case - so can also be used):
Illustration of the module:
Application examples:
The Tracer module can be used with many common airsoft guns.
Unlike the SPITFIRE series, the Body has side openings through which the light can be seen - including blue UV light.
The two functions, UV Tracer and muzzle flash effect, can be switched via the power button on the electronics. You can choose between the operating modes "Tracer only", "Flame effect only" or a combination of "Tracer with flame effect".
In contrast to RGB-Variants, the color of the flame effect is fixed. It appears in a fire-like color (orange with blue components).
The electronics are housed in a robust body and have a USB charging socket. A suitable charging cable is included in the scope of delivery
Tracer data:
» Length: 101mm
» Diameter: 38.10mm
» Weight: 174g (with Tracer unit)
» Material: aluminum
» Thread: 14mm CCW
Tracer unit:
» Length: 49mm
» Diameter: 31.50mm
» Weight: 26g
» Max. ROF: 35 BBs / second
» Runtime: approx. 15000 rounds without Spitfire function, approx. 6000 rounds incl. Spitfire function
Functions: (adjustable)
❖ UV Tracer (for green BBs)
❖ Flame effect (muzzle)
Adjusting the unit:
❖ Remove the unit from the Body (unscrew)
❖ Briefly press the power button once to switch on the unit
❖ Press and hold the power button for 2 seconds to change the function
❖ Briefly press the power button when the unit is switched on to switch it off
Charging & battery monitoring:
❖ Remove the Tracer Unit from the Body (unscrew)
❖ Connect the USB charging cable to the Tracer unit.
❖ A red LED inside will now start to flash slowly
❖ When the battery is fully charged, the LED briefly changes to "green" and a beep sounds
❖ If it is not used for a long time, it should be charged every 2-3 months
❖ If the battery drops below 30%, a red warning light starts to flash every 2 seconds
❖ If the Tracer is not moved for 5 minutes, it switches to "stand-by" and can be reactivated by shaking/moving it
Info accessing the battery:For maintenance work or to replace the battery, the top cover of the module must be removed. Two small Allen keys (hex keys) can be used for this purpose. These are inserted into the side holes to form a holding or pivot point, allowing the cover to be carefully removed.. |
If you use the XSTROBE without Tracer BBs, the muzzle flash simulation is still fully usable. In this case, we recommend using the module in mode 2 (Tracer deactivated). This increases the battery life.
Replacement Battery:
» Batterie de remplacement pour les unités Begadi Tracer (MK2, MK3, MK4, PBS1, XSTROBE)
Included / scope of delivery:
✔ XSTROBE Tracer Unit with 14mm CCW thread
uSB charging cable
✔ Instructions for use (English)
Begadi XSTROBE video
Product views (outside, complete):
Application examples (without Tracer module, empty case - so can also be used):
Illustration of the module:
Application examples:
