Begadi Picatinny Rear & Front Sight Bundle "High Profile", made of nylon-reinforced Polymer - TAN
This flip-up visor set in the high version offers a visor height of approx. 43 mm when unfolded and is therefore ideal for co-witness use with many Red Dot visors. Even when folded in, both Sights have a permanently integrated, flat emergency sight. This enables targeted aiming under the scope - a functional advantage in the event of an optics failure
Robust construction and precise adjustment
The set consists of Front and Rear Sights made of durable nylon-fiber composite. The flip-up mechanism works manually and locks reliably and without play thanks to high spring tension. When folded, the set is particularly flat and therefore also ideal as a secondary sight solution. Both elements also have an integrated emergency sight. If a Reddot fails, the sight can still be used with many Reddots without disassembly thanks to its sight height of 43 mm - a decisive advantage in dynamic deployment scenarios (see info box for more information)
Both the front and rear sights can be adjusted without tools via defined clicks. The adjustment is based on the MOA principle (Minute of Angle), as is also common with optical sights. With a sighting line of 14.5 inches / 36 cm, the click adjustment is around 0.7 MOA (Rear Sight) or approx. 0.64 MOA (Front Sight) per click (at 100 m). This enables precise correction of the point of impact - not only at close range, but also at medium distances
Use of this table:
The table describes how the line of sight changes with a >Click< of the adjustment. It is important to take the distance of the Front and Rearsight into account. 25cm usually corresponds to shorter weapons, such as MP5 and co, 36cm is the normal sighting distance for a Nova MK18 and similar weapons.
Practical example:You want to shoot a Begadi Nova 18 and have a distance of 10m to the target. The hits are on average 15mm too far to the left and 10mm too low:
❖ One >Click< at 25m corresponds to an adjustment of 5mm at a distance of Front - Rear 36cm
❖ You adjust the rearsight 3 >Click< to the right
❖ And the Frontsight 2 >Click< upwards.
All in all, these sights are not decorative elements, but functional, precisely adjustable sights that can be used both as a backup and as a primary aiming aid.
Technical data:
» Material: nylon fiber composite (high-strength)
» Weight Front Sight: 22 g
» Weight Rear Sight: 25 g
» Height of the sight line when folded out: approx. 43 mm
» Height when folded in: approx. 9.5 mm
» Integrated emergency sight can also be used when folded in
» Suitable for all Picatinny rails
Animation: Unfolding the sights:
Product views:
Application examples - mounted on several airsoft guns, each shown from different views...Frontsight and Rearsight:
Application examples / outdoor use pictures:
Robust construction and precise adjustment
The set consists of Front and Rear Sights made of durable nylon-fiber composite. The flip-up mechanism works manually and locks reliably and without play thanks to high spring tension. When folded, the set is particularly flat and therefore also ideal as a secondary sight solution. Both elements also have an integrated emergency sight. If a Reddot fails, the sight can still be used with many Reddots without disassembly thanks to its sight height of 43 mm - a decisive advantage in dynamic deployment scenarios (see info box for more information)
 Info box on the mounting height of Reddot sightsThe high mounting with a sight height of 43 mm when unfolded is specially designed to be combined with commercially available Red Dots of this height. This allows aiming directly through the Red Dot in the event of a failure - disassembly is not necessary. This function is also clearly illustrated in the other product images below |
Both the front and rear sights can be adjusted without tools via defined clicks. The adjustment is based on the MOA principle (Minute of Angle), as is also common with optical sights. With a sighting line of 14.5 inches / 36 cm, the click adjustment is around 0.7 MOA (Rear Sight) or approx. 0.64 MOA (Front Sight) per click (at 100 m). This enables precise correction of the point of impact - not only at close range, but also at medium distances
| Click to centimeter conversion |
MOA |
10 meters |
25 meters |
50 meters |
| Height and side adjustment - distance Front - Rear 25cm |
~ 1,00 |
~ 3 mm |
~ 7 mm |
~ 14 mm |
| Height and side adjustment - Distance Front - Rear 36cm | ~ 0,73 |
~ 2 mm |
~ 5 mm |
~ 10 mm |
Use of this table:
The table describes how the line of sight changes with a >Click< of the adjustment. It is important to take the distance of the Front and Rearsight into account. 25cm usually corresponds to shorter weapons, such as MP5 and co, 36cm is the normal sighting distance for a Nova MK18 and similar weapons.
Practical example:You want to shoot a Begadi Nova 18 and have a distance of 10m to the target. The hits are on average 15mm too far to the left and 10mm too low:
❖ One >Click< at 25m corresponds to an adjustment of 5mm at a distance of Front - Rear 36cm
❖ You adjust the rearsight 3 >Click< to the right
❖ And the Frontsight 2 >Click< upwards.
All in all, these sights are not decorative elements, but functional, precisely adjustable sights that can be used both as a backup and as a primary aiming aid.
Technical data:
» Material: nylon fiber composite (high-strength)
» Weight Front Sight: 22 g
» Weight Rear Sight: 25 g
» Height of the sight line when folded out: approx. 43 mm
» Height when folded in: approx. 9.5 mm
» Integrated emergency sight can also be used when folded in
» Suitable for all Picatinny rails
Animation: Unfolding the sights:
Product views:
Application examples - mounted on several airsoft guns, each shown from different views...Frontsight and Rearsight:
Application examples / outdoor use pictures:
