Army Armament Red Dot Mount Plate for R32 GBB (1911, Excalibur, Earl)
Reddot Mount Plate, suitable for Army Armament R32 Excalibur & Earl GBB.
Made from aluminum.
Scope of delivery consists of the two-part adapter plate and two screws.
The Red Dot Plate must be replaced by the rear sight for mounting.
To do this, separate the Slide from the Frame.
Remove the screws from the rear sight.
Now you can push in the dummy firing pin and remove the nozzle housing downwards.
If it does not fall out by itself, you can help with a pointed object.
Now you can remove the rear sight.
Reinstall the nozzle housing and mount the red dot plate.
Screw it tight and put the Slide back on the Frame.
You can then mount any Red Dot.
Not suitable for old R32 models.
The Enhanced Charging Handle for R32 can be fitted, but is not included in the scope of delivery.
Different Reddots can be used, 2 threads are available for this:
M3 thread with a hole spacing (center to center) of: 19mm
M4 thread with a hole spacing (center to center) of: 14mm
Made from aluminum.
Scope of delivery consists of the two-part adapter plate and two screws.
The Red Dot Plate must be replaced by the rear sight for mounting.
To do this, separate the Slide from the Frame.
Remove the screws from the rear sight.
Now you can push in the dummy firing pin and remove the nozzle housing downwards.
If it does not fall out by itself, you can help with a pointed object.
Now you can remove the rear sight.
Reinstall the nozzle housing and mount the red dot plate.
Screw it tight and put the Slide back on the Frame.
You can then mount any Red Dot.
Not suitable for old R32 models.
The Enhanced Charging Handle for R32 can be fitted, but is not included in the scope of delivery.
Different Reddots can be used, 2 threads are available for this:
M3 thread with a hole spacing (center to center) of: 19mm
M4 thread with a hole spacing (center to center) of: 14mm
