Begadi CNC Aluminum Red Dot Mounting Plate for Cyma CM.127 AEPs
This adapter plate for mounting Red Dots was specially designed for the CM.127.
With adjustments, mounting on the CM.030 is also possible (see product photos).
Holstering is also no problem with the mounting plate with many common hard shell holsters.
(e.g. BEGADI "Multi Fit" hard shell holster).
Features:
- CNC machined from aluminum
- Compatible with all Red Dots with a hole spacing of 13 mm (M4) and 19.5mm (M3)
- Screws for mounting the plate on the CM.127 or CM.030 are included in delivery
- Screws for mounting the Red Dots are not included, they are included with the Red Dot
Mounting on the CM.127:
The rear sight must be removed for this.
This is fixed on the inside of the slide with two screws.
The mounting plate is placed in place of the rear sight in the recess provided for this purpose and fixed from below with the enclosed screws
Adjustments and mounting for the CM.030:
For mounting on the CM 030, the lateral edges must be adjusted so that the plate lies flat.
The other steps for mounting are identical to those for the CM 127.
The following Red Dots from our range, for example, are suitable:
- Mini Reddot with light sensor (original screws of the Reddot must be shortened)
- Begadi Micro Dot Gen.2 (19mm) with 2 mounts & protective cover
- Begadi Compact Dot
The following Red Dots from our assortment do not fit for example:
- UFC Reflex Mini Reddot - black
- xFORCE XFR02 / XR020 Solar Micro Red Dot
With adjustments, mounting on the CM.030 is also possible (see product photos).
Holstering is also no problem with the mounting plate with many common hard shell holsters.
(e.g. BEGADI "Multi Fit" hard shell holster).
Features:
- CNC machined from aluminum
- Compatible with all Red Dots with a hole spacing of 13 mm (M4) and 19.5mm (M3)
- Screws for mounting the plate on the CM.127 or CM.030 are included in delivery
- Screws for mounting the Red Dots are not included, they are included with the Red Dot
Mounting on the CM.127:
The rear sight must be removed for this.
This is fixed on the inside of the slide with two screws.
The mounting plate is placed in place of the rear sight in the recess provided for this purpose and fixed from below with the enclosed screws
Adjustments and mounting for the CM.030:
For mounting on the CM 030, the lateral edges must be adjusted so that the plate lies flat.
The other steps for mounting are identical to those for the CM 127.
The following Red Dots from our range, for example, are suitable:
- Mini Reddot with light sensor (original screws of the Reddot must be shortened)
- Begadi Micro Dot Gen.2 (19mm) with 2 mounts & protective cover
- Begadi Compact Dot
The following Red Dots from our assortment do not fit for example:
- UFC Reflex Mini Reddot - black
- xFORCE XFR02 / XR020 Solar Micro Red Dot
Review Partner