Begadi PRO MONOLITH - TDC Rotary CNC HopUp Unit for Begadi Sport / Cyma SVD & SVU Series
![ICS M1 Garand HopUp Unit [ME-14]](https://www.begadi.com/media/catalog/product/cache/c5d0e56eb553c22c59750f4b00ae9e52/e/9/e976bd5a4410442625f904e823a09d9a.jpg)
Other interesting articles:
CNC-Machined TDC HopUp Unit for SVD & SVU Airsoft Rifles
With our MONOLITH, we offer owners of a Begadi Sport SVD/SVU a precise CNC-machined TDC HopUp Unit made of 7075 aluminum. Thanks to its design and fitting accuracy, it is significantly more precise and easier to adjust than the standard HopUp Unit. The adjustment wheel is guided by a 360° system, which prevents the wheel from jamming or snagging. This also eliminates the play of the tensioner, which, compared to the original unit, is actuated consistently, meaning flyers upwards are a thing of the past. Thanks to the integrated O-ring in the adjustment wheel, the MONOLITH can be adjusted continuously. A fine thread was manufactured for the tensioner mount. One rotation of the wheel equals 0.35 mm of movement of the tensioner. For the C-Clip, as with our other PRO series units, we rely on CNC-machined POM. This has been extended to the rear due to the barrel length of the SVD/SVU to prevent twisting.Compatible with 5 mm and 7 mm HopUp Systems
As with our other high-quality CNC units, we also offer the option to use a standard 5 mm or 7 mm HopUp system here. If you want to keep the original barrel, a 5 mm Tensioner (Item no. 26021028) is required. If you are using a barrel with a 7 mm HopUp window, the 6 mm Tensioner (Item no. 26021029) can also be installed. Please note that a 7 mm system only has advantages with heavy BBs (0.36 g+).Flat-Hop or R-Hop?
Our MONOLITH is compatible with all common Flat- and R-Hop buckings, and the original nozzle can be retained. For example, we recommend our SHP5 or FLY5 bucking if you want a Flat-Hop setup. For R-Hop, we offer the MAG and MHP buckings.An overview of our (S)AEG HopUp Buckings can be found HERE
Plug & Play
The MONOLITH can be installed without modifications or adjustments, and the original magazines can be used. The side screws on the outer barrel of the SVD/SVU are no longer strictly necessary after installation.Scope of Delivery
» CNC HopUp Unit» CNC adjustment wheel with fine thread
» CNC centering sleeve for barrels up to 8.6 mm diameter
» CNC mount for tensioner (D3 mm)
» CNC C-Clip made of POM
» O-ring for the adjustment wheel
» O-ring for the centering sleeve
» Screws for the adjustment wheel
Installation Video:
Product Views, Complete:
Scope of Delivery:
Product Views, Details:
Views in Installed Condition:
