Begadi PRO 70° HopUp Tensioner (D=2,5mm) -6mm- for barrels with large (approx. 7mm) barrel window
Other interesting articles:
Begadi PRO HopUp Tensioner with a hardness of 70°, suitable for many HopUp Units.
This tensioner developed by us is optimized for our Begadi PRO HopUp Buckings/Rubbers, but can also be used with many other Buckings.
The radius is 4.75mm (9.5mm diameter) and is therefore slightly smaller than the bucking itself. This moves the inner patch of the bucking left and right down a little more and thus supports the centering of the BB. Another feature are the outer bearing surfaces for the HopUp Lever, these are designed slightly slanted to distribute the pressure evenly.
We offer this tensioner in two different versions:
- 5mm version for all common HopUp/barrel systems with a barrel window of min. 4,8mm
- 6mm version especially for large barrel windows (6,4mm+) and bucking systems with long patches
Diameter for HopUp Arm (3mm or 2,5mm) - (flat or high)
Since there are many different HopUp Unit on the market, we have chosen two versions for the diameter of the mount:
D=3mm - This version has a rounding of 3mm, making it slightly higher than the 2.5mm version. With this, the pressure on the bucking is built up much earlier.
D=2,5mm - Here the diameter of the rounding is only 2,5mm and is a bit flatter than the D=3mm version. This is more suitable if the system tends to over hop or the HopUp arm has a 2.5mm diameter.
Please check before buying if the tensioner is compatible with your HopUp unit, all dimensions can be found in the picture below
This tensioner developed by us is optimized for our Begadi PRO HopUp Buckings/Rubbers, but can also be used with many other Buckings.
The radius is 4.75mm (9.5mm diameter) and is therefore slightly smaller than the bucking itself. This moves the inner patch of the bucking left and right down a little more and thus supports the centering of the BB. Another feature are the outer bearing surfaces for the HopUp Lever, these are designed slightly slanted to distribute the pressure evenly.
We offer this tensioner in two different versions:
- 5mm version for all common HopUp/barrel systems with a barrel window of min. 4,8mm
- 6mm version especially for large barrel windows (6,4mm+) and bucking systems with long patches
Diameter for HopUp Arm (3mm or 2,5mm) - (flat or high)
Since there are many different HopUp Unit on the market, we have chosen two versions for the diameter of the mount:
D=3mm - This version has a rounding of 3mm, making it slightly higher than the 2.5mm version. With this, the pressure on the bucking is built up much earlier.
D=2,5mm - Here the diameter of the rounding is only 2,5mm and is a bit flatter than the D=3mm version. This is more suitable if the system tends to over hop or the HopUp arm has a 2.5mm diameter.
Please check before buying if the tensioner is compatible with your HopUp unit, all dimensions can be found in the picture below