Begadi SPITFIRE MK4 Tracer with optional flame effect (14mm CCW) -TAN / pearl gold-
The SPITFIRE MK4 is a Tracer Unit with integrated muzzle flash simulation in the form of a flame effect. The body is made of robust aluminum and has a 14 mm CCW thread, suitable for many airsoft guns
Both functions - UV Tracer and muzzle flash - can be controlled via the multifunction button. This allows flexible adjustment of operation: Tracer function alone, flame effect only or both combined. In contrast toRGB-variants, the flame color is fixed. The effect creates a realistic muzzle flash in orange with bluish components
The electronics are shockproof and integrated in the Body. The unit is charged via the USB charging connection - a suitable charging cable is included in the scope of delivery
Tracer features:
» Length: 90mm
» Diameter: 39.40mm
» Weight: 126g (with Tracer unit)
» Material: aluminum
» Thread: 14mm CCW
Tracer Unit features:
» Length: 49mm
» Diameter: 31.50mm
» Weight: 26g
» Max. ROF: 35 BBs / second
» Runtime: approx. 15000 rounds without Spitfire function, approx. 6000 rounds incl. Spitfire function
Functions: (adjustable)
❖ UV Tracer (for green BBs)
❖ Flame effect (muzzle)
Battery:
A LiIon battery with 3.7V and 300mAh is installed in the Tracer. This can be replaced in the event of a defect. You can find a replacement battery here
Setting the unit:
❖ Remove the unit from the Body (unscrew)
❖ Briefly press the power button once to switch on the unit
❖ Press and hold the power button for 2 seconds to change the function
❖ Briefly press the power button while the unit is switched on to switch it off.
Charging & battery monitoring:
❖ Remove the Tracer Unit from the Body (unscrew).
❖ Connect the USB charging cable to the Tracer unit.
❖ A red LED inside will now start to flash slowly.
❖ When the battery is fully charged, the LED briefly changes to "green" and a beep sounds.
❖ If the Tracer is not used for a longer period of time, it should be charged every 2 - 3 months.
❖ If the battery drops below 30%, a red warning light starts to flash every 2 seconds.
❖ If the Tracer is not moved for 5 minutes, it switches to "stand-by" and can be reactivated by shaking/moving it
Information on use without Tracer BBs:
If you use the SPITFIRE without Tracer BBs, the muzzle flash simulation is still fully usable. In this case, we recommend using the module in mode 2 (Tracer deactivated). This increases the battery life.
Suitable battery:
» Replacement battery for Begadi Tracer Units (MK2, MK3, MK4, PBS1, XSTROBE)
Included / scope of delivery:
✔ SPITFIRE MK4 Tracer Unit with 14mm CCW
✔ USB Charging Cable
✔ Operating Instructions (English)
Begadi Spitfire MK4
Product views (outside, complete):
Application examples (without Tracer module, empty case - so can also be used):
Illustration of the module:
Application examples:
Both functions - UV Tracer and muzzle flash - can be controlled via the multifunction button. This allows flexible adjustment of operation: Tracer function alone, flame effect only or both combined. In contrast toRGB-variants, the flame color is fixed. The effect creates a realistic muzzle flash in orange with bluish components
The electronics are shockproof and integrated in the Body. The unit is charged via the USB charging connection - a suitable charging cable is included in the scope of delivery
Tracer features:
» Length: 90mm
» Diameter: 39.40mm
» Weight: 126g (with Tracer unit)
» Material: aluminum
» Thread: 14mm CCW
Tracer Unit features:
» Length: 49mm
» Diameter: 31.50mm
» Weight: 26g
» Max. ROF: 35 BBs / second
» Runtime: approx. 15000 rounds without Spitfire function, approx. 6000 rounds incl. Spitfire function
Functions: (adjustable)
❖ UV Tracer (for green BBs)
❖ Flame effect (muzzle)
Battery:
A LiIon battery with 3.7V and 300mAh is installed in the Tracer. This can be replaced in the event of a defect. You can find a replacement battery here
Setting the unit:
❖ Remove the unit from the Body (unscrew)
❖ Briefly press the power button once to switch on the unit
❖ Press and hold the power button for 2 seconds to change the function
❖ Briefly press the power button while the unit is switched on to switch it off.
Charging & battery monitoring:
❖ Remove the Tracer Unit from the Body (unscrew).
❖ Connect the USB charging cable to the Tracer unit.
❖ A red LED inside will now start to flash slowly.
❖ When the battery is fully charged, the LED briefly changes to "green" and a beep sounds.
❖ If the Tracer is not used for a longer period of time, it should be charged every 2 - 3 months.
❖ If the battery drops below 30%, a red warning light starts to flash every 2 seconds.
❖ If the Tracer is not moved for 5 minutes, it switches to "stand-by" and can be reactivated by shaking/moving it
Information on use without Tracer BBs:
If you use the SPITFIRE without Tracer BBs, the muzzle flash simulation is still fully usable. In this case, we recommend using the module in mode 2 (Tracer deactivated). This increases the battery life.
Suitable battery:
» Replacement battery for Begadi Tracer Units (MK2, MK3, MK4, PBS1, XSTROBE)
Included / scope of delivery:
✔ SPITFIRE MK4 Tracer Unit with 14mm CCW
✔ USB Charging Cable
✔ Operating Instructions (English)
Begadi Spitfire MK4
Product views (outside, complete):
Application examples (without Tracer module, empty case - so can also be used):
Illustration of the module:
Application examples:
