Begadi Silverline DSG - CNC Gearset (Low Noise) - galvanized nickel-plated - 9:1 with 8Z Sector Gear
Other interesting articles:
In cooperation with Red Dragon, we offer our customers a high-quality, CNC-manufactured Gears Set.
This set is characterized by perfect concentricity and low noise levels, even at high speeds.
Made from carbon steel, the Gears are suitable for all common tunings.
The surface is not black oxidized as usual, but galvanically nickel-plated.
This coating is significantly harder, more durable and also protects against corrosion.
The 8 positions on the Bevel Gear for the anti-reverse significantly reduce gear jams on weapons without EFCS. The Bevel Gear is compatible with commercially available Pinion Gears (e.g. Begadi Mamba, Tienly, SHS, Cyma, Lonex, Red Dragon, E&C, E&L)
Important:
This gear set is a DSG (Double Sector Gear).
A good technical understanding is required for installation, otherwise some components may be damaged.
Begadi accepts no liability for incorrect installation due to ignorance or combination. A Tappet plate with a short fin is required, if you are not aware of this, we advise against installation.
We only recommend this Gear Set for Semi AEGs/AEGs with a barrel length of up to 200mm.
When using in 0.5 joule AEGs, pay attention to the speed and timing.
Features:
Manufacture: CNC
Material: Carbon steel
Coating: galvanic nickel-plated
Gear ratio: 9:1 (18:1/2)
Sector Gears: 8 teeth
Optical EFCS:
We tested the Gears set with a Gate Titanium and found no problems with cycle monitoring.
The surface is not black oxidized as usual, but galvanically nickel-plated.
This coating is significantly harder, more durable and also protects against corrosion.
The 8 positions on the Bevel Gear for the anti-reverse significantly reduce gear jams on weapons without EFCS. The Bevel Gear is compatible with commercially available Pinion Gears (e.g. Begadi Mamba, Tienly, SHS, Cyma, Lonex, Red Dragon, E&C, E&L)
Important:
This gear set is a DSG (Double Sector Gear).
A good technical understanding is required for installation, otherwise some components may be damaged.
Begadi accepts no liability for incorrect installation due to ignorance or combination. A Tappet plate with a short fin is required, if you are not aware of this, we advise against installation.
We only recommend this Gear Set for Semi AEGs/AEGs with a barrel length of up to 200mm.
When using in 0.5 joule AEGs, pay attention to the speed and timing.
Features:
Manufacture: CNC
Material: Carbon steel
Coating: galvanic nickel-plated
Gear ratio: 9:1 (18:1/2)
Sector Gears: 8 teeth
Optical EFCS:
We tested the Gears set with a Gate Titanium and found no problems with cycle monitoring.
