E&L AK 104 "Gen.4" S-AEG with Variohead, Pro HopUp & Begadi CORE EFCS / Mosfet (free from 18 yrs.)
Shipping possible from the age of 18 due to age check.
Possession permitted from the age of 18. This Airsoft is subject to the prohibition of carrying!
You can see details of the shipping service providers when you are logged in.
For your orders with Begadi, we use a system based on two-step authentication, as required by law. The age of the account holder and the age of the recipient of the goods are checked.
The check is automated, convenient and GDPR-compliant! No data is stored.
-
Begadi AK Rear Sight Rail€16.90
Importer: Begadi
System: S-AEG (= shoots only semiauto, no full auto)
Caliber: 6mm
HopUp: Yes, adjustable
Material: steel and nylon
Magazine capacity: approx. 120 rounds
Energy: approx. 1.5 - 1.2 J. (adjustable, via variohead)
Total length: approx. 590 - 830mm
Weight: approx. 3650g
Barrel length: 360mm / 6,03mm
Connector system: Dean/T-connector
Gearbox: Version 3 reinforced with FSWS
Scope of delivery: rifle, magazine, certificate with chrono protocol, variohead adjustment tool
PTB approval: Details see here
Technical data:
- completely made of steel and robust nylon plastic
- One-piece steel outer barrel
- Reproduced gas pickup and gas tube also made of steel
- Front and rear sight, mag catch, fire selector and other small parts are made of steel
- Handguard, grip and stock are made of very robust Nylon Fiber
- Steel housing with corrosion protection (scratch resistant)
- Rear sight adjustable in height
- Steel side mount to accept optics
- Spring replacement system
- Folding stock
- 24mm AK thread for flashhider and silencer
- very good response
- very robust V3 Gearbox Shell with FSWS
- 9mm ball bearings and steel bushings
- solid 18:1 steel gears with gear clip
- High torque motor with neodymium magnets
- Metal HopUp Unit
- 120 shot magazine is included
- Springguide made of steel with plastic coating
- Cylinder made of stainless steel
- CNC machined aluminum cylinder head with double O-ring
- 6,03mm tuning barrel
- Begadi PRO Piston with 14,5 steel teeth
- Begadi PRO Nozzle with two O-rings (20,50mm)
- Begadi PRO HopUp rubber (FLY5) with matching tensioner
- Begadi PRO VARIOHEAD (CNC machined pistonhead with ball bearing)
- Energy adjustable (without spring change) from approx. 1.5J. max. to 1.2J. min.
- 4 years warranty
Details of the 4th generation:
This is the latest upgrade of the E&L AK series.
This is now equipped with a Begadi PRO Piston with 14.5 steel teeth, Begadi PRO HopUp, Begadi PRO Nozzle and the Begadi PRO VARIOHEAD. The special feature: The energy can be easily throttled in a few seconds with the included Adjustment Tool. A change of the spring and removal of the gearbox is no longer necessary. The seal is improved by the installed Begadi PRO HopUp rubber with matching tensioner and the Begadi PRO aluminum Nozzle with two O-rings. The gearbox is still equipped with our Begadi CORE EFCS/Mosfet.
Begadi PRO HopUp:
- This SAEG comes directly with a Begadi PRO HopUp rubber (FLY5 60°) with matching tensioner.
- We recommend to use 0.28 - 0.32g BBs.
- If you want to use rather heavy BBs, we also offer the MAG (R-Hop) Bucking and 7mm systems in the bookable tuning options
Begadi PRO VARIOHEAD:
- Our Begadi PRO VARIOHEAD is an adjustable, CNC manufactured pistonhead with which the energy of the weapon can be quickly and easily throttled in steps.
- It is therefore not necessary to change a spring or open the gearbox to lower the energy. This is a great advantage for weapons without a spring change system.
- The energy can be reduced in 4 steps via the click system and the included adjustment tool. To do this, the tool is pushed into the barrel from the front until the hexagon is anchored in the piston head.
- By turning (clicks) the energy is reduced step by step. This is achieved by a small amount (depending on the setting) of the existing air in the cylinder is discharged to the rear.
- The setting remains via the click system even with stronger springs and does not adjust.
Storage Information:
Always disconnect the battery from the gun when it is not in use! Otherwise, your battery can be discharged by the continuous monitoring and thus be damaged
- Internal EFC/Mosfet system
- Trigger via microswitch
- Mechanical safety
- Cycle monitoring (no GearJam possible)
- Battery monitoring (LiPo, LiFe, Li-Ion, NiMH)
- Battery shutdown (LiPo, LiFe, Li-Ion, NiMH)
- Fast response
- Intelligent active brake
- Also for strong batteries
- Short time loadable up to 240A
- Overvoltage protection
- Short circuit protection
- Plug & Play
- Dean / T-plug
- Semi-only, especially for Germany
- 4 years warranty
- Made in EU
Detailed information about the individual features can be found on our Begadi CORE EFCS / Mosfet Infopage .
Additionally we recommend our Begadi CORE EFCS / Mosfet Teaser, which also presents all features in detail. You can find it here. (YouTube, Begadi)
Additional information about warranty + CORE:
The above mentioned 4 years warranty refers to the complete S-AEG, not only to the function of the Begadi CORE, if the CORE Mosfet is installed. However, the same is the prerequisite for this extended warranty. If, for example, a different Mosfet is selected in the special Mosfet options (i.e. you ask us to remove the CORE and install a different Mosfet), the warranty will be reduced from 4 years to the usual 2 years. Also, the removed CORE will not be included in this case, but retained. Normally, we always include removed components, but this is explicitly not the case with the CORE - the CORE is only delivered in installed condition
Suitable batteries with original stock: (examples, other batteries with the same dimensions also fit)
Required connector: Dean
- Begadi "AMAX" LiPo battery 11,1V 1300mAh 25C Slim / AK Single Stick -beige-
- Begadi "AMAX" LiPo battery 7.4V 1200mAh 25C -long- single stick
- Begadi "AMAX" LiPo Battery 7.4V 1300mAh 25C Slim / AK Single Stick -white-
- Begadi "AMAX" LiPo Battery 11,1V 1200mAh 20C AK Single Stick -grey-
- Begadi "AMAX" LiPo Battery 11,1V 1200mAh 20C AK Short Single Stick with Dean -red-
- Begadi "AMAX" LiPo Battery 7,4V 1200mAh 20C AK Short Single Stick with Dean -red-
- Begadi "AMAX Superio" LiPo battery 11.1V 1400mAh 30/60C+ "AK Stick" with Dean -gold-
Videos & Reviews of earlier versions of the E&L AK104 / AK105 (before Gen.4)
Quite old series without CORE and also Diamond series, predecessor of Gen.4
- E&L Diamond series combi review M4 / AK [AK74, M4 MUR] (YouTube, REAPERs Airsoft) (old version without CORE)
- E&L AK 104 "Diamond+ Series" S-AEG with Begadi CORE EFCS / Mosfet Video Review (YouTube, TEAM-030-AIRSOFT)
- E&L AK 104 "Diamond+ Series" S-AEG Tech Video, Installation JeffTron Leviathan V3 Optical EFCS System & Mamba Motor (YouTube, TEAM-030-AIRSOFT)
- E&L AK 104 "Diamond+ Series" S-AEG with Begadi CORE EFCS / Mosfet Video Review (YouTube, Airsoft by TNT-Germany)
- E&L AK 105 "Diamond Series" S-AEG Video Review (YouTube, TEAM-030- AIRSOFT) (old version without CORE)
Info about suitable AK magazines:
We recommend the use of the following AK magazines:
- E&L AK 47 Midcap magazine, metal (120 BBs): fit very well and feed very well
- E&L AK 74N Midcap magazine, plastic -black- (120 BBs): fits very well and feeds very well
- E&L AK 74N Midcap magazine, plastic -brown- (120 BBs): seat very well and feed very well
- E&L AK 74N Midcap magazine, plastic -orange- (120 BBs): seat very well and feed very well
- Begadi AK74 Midcap magazine (150 BBs) -black-: seat very well and feed very well
- Arcturus AK 12 plastic midcap magazine (30 / 135 BBs): Fit: very good / Feeding: very good
- Arcturus AK Midcap magazine, with sight window (30 / 135 BBs): Accuracy of fit: very good / Feeding: very good
- Arcturus AK 74 plastic midcap magazine "Classic" (30 / 135 BBs): Accuracy of fit: very good / Feeding: very good
Tip, if the Begadi magazines do not snap into your E&L AK:
The front magazine retaining lug has to be flattened a bit on the top side (approx. 1mm) because it is too "thick" to snap into the AK magazine well. The problem exists only occasionally (tolerances in manufacturing on the part of E&L)
Other accessories:
Begadi HopUp Support for E&L AK models
Detailed introduction video to the Variohead:
Product images: