Begadi Tracer module for Supersonic Modular Silencer incl. adapter
Other interesting articles:
This Tracer Unit is specially designed for our Supersonic Silencer series,
developed and suitable for:
- Begadi Supersonic 9/45 Modular Silencer made of aluminum
- Begadi Supersonic 556 Modular Silencer made of aluminum
- Begadi Supersonic 762 Modular Silencer made of aluminum
If you have a dummy Silencer with the same internal dimensions, the Tracer can also be used here.
Three suitable adapters are included with the unit:
Adapter 1 with an outer diameter of 25.90mm (Supersonic 9/45)
Adapter 2 with an outer diameter of 31.90mm (Supersonic 556)
Adapter 3 with an outer diameter of 37.90mm (Supersonic 762)
The Tracer Unit is installed in the corresponding adapter and inserted together into the dummy Silencer.
Adapter 1 = aluminum cover must be used in all cases!
All Tracer Units with a diameter of 25mm can be used, including our
As soon as the BB reaches the front light barrier of the unit, it is illuminated by the ultra-bright UV LEDs.
All green Tracer BBs can be used.
Up to 30,000 BBs can be fired with the built-in lithium battery. A charging process of just 5 minutes is sufficient for a further 1000 BBs. To charge the Tracer, it must be removed from the Silencer. The USB Bushings is now open for charging. A USB cable is included in the delivery.
If the Tracer is not used, it automatically switches to standby after 5 minutes.
Please note: The Tracer module must always be fitted in the Silencer as close as possible to the Barrel - directly in the first element. If you fit the Tracer module in the Silencer too far away from the Barrel, it could be damaged.
Features:
- Made of aluminum/plastic
- Very compact Tracer
- Integrated motion sensor
- automatic switch-off/standby
- High power UV LED technology
- 6 LEDs illuminate the BB from two sides
- A fully charged battery lasts for up to 30000 shots
- Up to 35 BBs per second (2100 RPM) can be illuminated
- Built-in lithium battery with USB charging port
- Integrated charge level indicator (via LED)
- Protection against deep discharge
- The Tracer can also be inserted into the shells of other Silencers
- suitable for green Tracer BBs, brightness may vary with other colors
- In case of longer storage, it is recommended to charge the battery every 3 months
Operation:
- Switch on: Switch on the Tracer using the rear button. You will hear a long beep.
- Switch off: Press the button again. (two short beeps)
- Reset: Press and hold the reset button for 2 seconds.
LED inside (battery indicator):
- green flashing = battery fully charged
- flashing red = The battery is low
- red light = The battery is empty
Scope of delivery:
- Tracer Unit incl. LiIon battery
- USB charging cable
- Adapter with 25.90mm outer diameter
- Adapter with 31.90mm outer diameter
- Adapter with 37.90mm outer diameter
Tracer Unit length 47mm, diameter 26mm
Adaptations to use the Tracer in AK PBS-1 & PBS-1 Mini:
The smaller Tracer adapter needs to be slightly narrowed, then it will also fit in a PBS Airsoft Silencer.
Begadi AK PBS Silencer inner diameter is approx. 31.75mm, the adapter of the Tracer has an outer diameter of approx. 31.9mm.
Reviews:
- Begadi Tracer Module for Supersonic Modular Silencer incl. Adapter Video Review, French (YouTube, Golgy, a sunday gamer)
- Begadi Tracer Module for Supersonic Modular Silencer incl. Adapter Video Review, French (YouTube, ScarFab94)
developed and suitable for:
- Begadi Supersonic 9/45 Modular Silencer made of aluminum
- Begadi Supersonic 556 Modular Silencer made of aluminum
- Begadi Supersonic 762 Modular Silencer made of aluminum
If you have a dummy Silencer with the same internal dimensions, the Tracer can also be used here.
Three suitable adapters are included with the unit:
Adapter 1 with an outer diameter of 25.90mm (Supersonic 9/45)
Adapter 2 with an outer diameter of 31.90mm (Supersonic 556)
Adapter 3 with an outer diameter of 37.90mm (Supersonic 762)
The Tracer Unit is installed in the corresponding adapter and inserted together into the dummy Silencer.
Adapter 1 = aluminum cover must be used in all cases!
All Tracer Units with a diameter of 25mm can be used, including our
As soon as the BB reaches the front light barrier of the unit, it is illuminated by the ultra-bright UV LEDs.
All green Tracer BBs can be used.
Up to 30,000 BBs can be fired with the built-in lithium battery. A charging process of just 5 minutes is sufficient for a further 1000 BBs. To charge the Tracer, it must be removed from the Silencer. The USB Bushings is now open for charging. A USB cable is included in the delivery.
If the Tracer is not used, it automatically switches to standby after 5 minutes.
Please note: The Tracer module must always be fitted in the Silencer as close as possible to the Barrel - directly in the first element. If you fit the Tracer module in the Silencer too far away from the Barrel, it could be damaged.
Features:
- Made of aluminum/plastic
- Very compact Tracer
- Integrated motion sensor
- automatic switch-off/standby
- High power UV LED technology
- 6 LEDs illuminate the BB from two sides
- A fully charged battery lasts for up to 30000 shots
- Up to 35 BBs per second (2100 RPM) can be illuminated
- Built-in lithium battery with USB charging port
- Integrated charge level indicator (via LED)
- Protection against deep discharge
- The Tracer can also be inserted into the shells of other Silencers
- suitable for green Tracer BBs, brightness may vary with other colors
- In case of longer storage, it is recommended to charge the battery every 3 months
Operation:
- Switch on: Switch on the Tracer using the rear button. You will hear a long beep.
- Switch off: Press the button again. (two short beeps)
- Reset: Press and hold the reset button for 2 seconds.
LED inside (battery indicator):
- green flashing = battery fully charged
- flashing red = The battery is low
- red light = The battery is empty
Scope of delivery:
- Tracer Unit incl. LiIon battery
- USB charging cable
- Adapter with 25.90mm outer diameter
- Adapter with 31.90mm outer diameter
- Adapter with 37.90mm outer diameter
Tracer Unit length 47mm, diameter 26mm
Adaptations to use the Tracer in AK PBS-1 & PBS-1 Mini:
The smaller Tracer adapter needs to be slightly narrowed, then it will also fit in a PBS Airsoft Silencer.
Begadi AK PBS Silencer inner diameter is approx. 31.75mm, the adapter of the Tracer has an outer diameter of approx. 31.9mm.
Reviews:
- Begadi Tracer Module for Supersonic Modular Silencer incl. Adapter Video Review, French (YouTube, Golgy, a sunday gamer)
- Begadi Tracer Module for Supersonic Modular Silencer incl. Adapter Video Review, French (YouTube, ScarFab94)







