You are here:
Home
Airsoft Frags &...
Motion Sensor / Au...

Motion Sensor / Automatic Trigger for Begadi M1 Airsoft Mine

Skip to the end of the images gallery

Skip to the beginning of the images gallery

You can see details about the shipping service providers when you are logged in.

Manufacturer: BEGADI

Availability

In stock

SKU 17823002

Delivery Time: (Germany) 1-3 Business days. Further details

€69.00

Incl. 19% VAT, plus shipping costs

Buy 3 for €66.93 each and save 3%
Buy 5 for €65.55 each and save 5%
Buy 7 for €64.17 each and save 7%
Buy 9 for €62.79 each and save 9%

Qty

Piece

Reward points:

(Please note: In the event of a revocation, the corresponding points will be deducted from your account!)

Note on legal classification
The Begadi Mine M1 is available from us without proof of age or restrictions. This is due to the fact that the mine does not have any properties that make it relevant for weapons legislation.

its function is not suitable for influencing a person's power of attack or defense (WaffG Annex 1 ff.)
the BBs are not fired in a targeted manner (WaffG Annex 1 / 1.2.3.)
no cold gases are used for propulsion (WaffG Annex 1 / 1.9)
the projectiles are not propelled through a Barrel (WaffG Annex 1 / 1.1)

See also the entire legal text. Of course, the Begadi Mine M1 is also subject to regulatory provisions, especially with regard to its use in public spaces (nuisance, gross mischief, damage to property, etc...)! The mine should also be used responsibly on the playing field.

Short info Begadi Mine
The Begadi Mine M1 (M1 for short) is a sim mine developed by Begadi for airsoft, which works purely mechanically. This means that neither propellants nor pyrotechnics are required. You can find the Begadi M1 Airsoft Mine with 360° coverage here .

This offer deals with the optional accessory, themotion sensor

Use of the motion sensor:
This electric module developed for the Begadi Mine M1 adds a programmable trigger with motion sensor to the mine.

To use the Begadi mine with the motion sensor fitted, prepare the mechanical part as usual (tension and fill) and look for a suitable place to place it
The motion sensor (the white dome) is turned in the direction from which the target is expected.
Important: The sensor must not be covered or shielded.

Then press the black switch once, the M1 starts to flash red, now you can move away - as soon as the flashing stops, the mine is armed.
If a person then enters the sensor's field of vision (approx. 200°), the mine is triggered and disperses its charge.

To interrupt the arming of the mine, it is sufficient to briefly press the button once while the LED is flashing red.

Info: To defuse the mine when the motion detector is active, you have to approach the mine from behind, hold the top, push the safety pin back in and then trigger the motion detector.

Instructions for configuring the motion sensor
The motion detector is delivered with the following configuration:

5 seconds after activation until the mine is armed (you must move out of the sensor's field of vision within the 5 seconds)
Mine triggers immediately when the motion sensor is activated / someone walks into its field of vision

These options can be adjusted / changed using the motion sensor's power button, we have written instructions on how to adjust the settings below.

Configuring the delay for activating the motion sensor
(Time between pressing the trigger switch until the motion detector is active and the mine is "armed")

Press switch for 2-3 seconds --> LED lights up 1x GREEN
press 1x for 10 seconds delay ￫ LED lights up 1x GREEN
press 2x for 15 seconds delay ￫ LED lights up 2x GREEN
press 3x for 20 seconds delay ￫ LED lights up 3x GREEN
press 4x for 25 seconds delay ￫ LED lights up 4x GREEN
Press switch for 2-3 seconds ￫ LED lights up 1x GREEN
Press switch again for 2-3 seconds ￫ lights up 1x GREEN
Done ￫ Mine inactive / off

Canceling the countdown / arming
While the LED flashes red ￫ Press button 1x ￫ LED flashes RED 3x ￫ Mine inactive / off

Configuration Delay of the Activation / Trigger of the Mine
(Influences whether the mine is triggered immediately or with a delay when triggered by the motion detector)

Press the switch for 2-3 seconds ￫ LED lights up 1x GREEN
Press switch again for 2-3 seconds ￫ LED lights up 1x GREEN
press 1x for immediate triggering ￫ LED lights up 1x GREEN
press 2x for 2 second delay ￫ LED lights up 2x GREEN
press 3x for 3 seconds delay ￫ LED lights up 3x GREEN
press 4x for 4 seconds delay ￫ LED lights up 4x GREEN
press 5x for 5 seconds delay ￫ LED lights up 5x GREEN
press 6x for 10 seconds delay ￫ LED lights up 6x GREEN
Press switch for 2-3 seconds ￫ LED lights up 1x GREEN
Done ￫ Mine inactive / off

Scope of delivery:
The motion sensor module comes in an individual box, which contains

the electric module
the tool for assembly, maintenance and adjustment
Attention: The scope of delivery does not include batteries or a Mine!

Features:

simple design, few parts and very easy to maintain
very robust, even under mechanical stress
very sensitive and precise sensor
the focus delay is adjustable
adjustable time-delayed triggering
2x 9V block batteries are required (not included).
splash-proof, but should not be exposed to rain for long periods!

Tips and Tricks

it is best to place the sensor at a 90° angle to the target, e.g. at the edge of the path, with a direct 90° field of vision across the path
if you are expecting larger groups, the sensor can also be positioned so that the first target passes by
for more open terrain, the countdown to arming can be extended (instructions above)
for larger target groups, the triggering can be delayed by up to 10 seconds (instructions above)
the mine can also be triggered via a cord with the electric module fitted

Facts and data: